You are here: Home » Products » Blowing-Filling-Capping Combi Block Machine » Blowing Filling Capping 3 in 1 Filling Lines
Blowing Filling Capping 3 in 1 Filling Lines




Blowing Filling Capping 3 in 1 Filling Lines is designed by us at the base of adsorbing international advanced technology. This machine is consisted of main blowing machine、heating stove、auto sending pre-form device、filling system 、capping system、electrical controlling system and pneumatic controlling system. This blowing filling capping 3 in 1 filling line has characters of high degree of automation、stable specification、high efficiency manufacturing and low cost.

Blowing Filling Capping 3 in 1 Filling Lines has reached international level of same products, thsi filling lines widely used in mineral water bottle、pure water bottle、soft drinks bottle、medicine bottle、food bottle and other PET containers.


Blowing Filling Capping 3 in 1 Filling Lines Manufacture process profile:

a. Pre-form inlet controlling

Put pre-forms into hopper of auto sending device,send to heating stove through belt and drum unit.

b. Bottle pre-form heating controlling

Bottle pre-forms are sent to pre-form base by guide turn table, the bases get pre-forms and then send to stove for heating one by one.

Blowing and rotating  heating stove has 8-floors infrared lamp to heat pre-forms, the pre-forms run itself and also the infrared lamp can be adjusted temperature independently.

Heating stove has pre-form screw head cooling way and stove ventilation and cool air duct, it ensures that pre-forms will not be hard warmed.

c. Blowing technology controlling

Discharge warmed pre-forms to outlet guide by discharge pre-form cover, put pre-forms into blowing moulds by manipulator, seal the bottle mouth and extrude the body, also inlet two grade air pressure(pre-blowing pressure and high pressure air) and make pre-form to be bottles. According to the requirement of art, there will inlet cooling water for moulds, all above processes are controlled by main machine computer.

d. Bottle check and outlet

After blowing, the manipulator get bottles out of mould and the qualified bottle will be send to guide, this guide can be connected directly to filling line and also can connect to conveying chain, send to bottle warehouse.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related products
  • Blowing-Filling-Capping Combi Block

          Blowing-Filling-Capping-Combi Block Machinery Features: 1. Pre-form inlet controlling 2. Put pre-forms into hopper of auto sending device, send to heat......

  • Blowing-Filling-Capping Combine System

    Blowing-Filling-Capping Combine System Equipment overview Blowing-Filling-Capping combine system is our company based on the success of the entire line-rich proje......

Contact us
Add: No.1 Jinnan Road, Jinfeng Town, Zhangjiagang City, Jiangsu, P.R. China
TEL:+86-512-35005020 /+86-512-58572988